| Amount | 0đ |
|---|---|
| Total | 0đ |
What causes damage to truck tire and dump truck tire ? Mainly caused by road and terrain conditions, or what other causes? Damage to tire is simple to avoid through higher and more disciplined vigilance of vehicle owners. This will save you a lot of money.
>> Bus, truck tire and dump truck tire
Truck, heavy truck, dump truck are built to be used for transportation and construction under different working conditions. Tires for them come in many different sizes and types, exclusively for specific uses. In many cases, damage to tire can be prevented by following a few simple instructions. One of the most important guidelines involved in performing regular visual inspection is: checking tire sidewalls, edges and rims for unusual wear or damage.
Under all conditions, proper tire pressure is certainly important for the tires. If the pressure is lower than 1.5 bar from the recommended level, this may lead to a 10% reduction in performance. This can even damage the re-use of the tires because the tires' shoulders and heels are overloaded. And insufficient tire pressure also leads to higher fuel consumption, causing economic loss.
Make sure that the goods and manufacturer's instructions are strictly followed. And always choose the right tire / wheel combination. An improper combination will lead to excessive forces, and thus wear and tear.
For example, a lot of damage to tires occurs on construction sites when driving through shredded iron or sharp corrugated iron sheets ... Torn marks on the tires can be avoided by focusing on driving, and by avoiding sharp edges of these obstacles. And when on roads and highways, using engine brakes often can cause jagged wear at low loads. This can easily be felt by hand. Braking marks, wear marks - are not always avoidable, but careful driving can help you not to have sudden or excessive braking.
With the type of dual wheel, the contact between the two tires can also lead to damage. So make sure the tires don't touch each other. To make wear more even, internal and external tires (paired) can be interchanged after a certain period of time.
The damage caused to tread often occurs when the vehicle is used on rough surfaces that can be quickly identified through visual inspection. In addition, checking the depth of tire tread is also one of the most important inspections you need to perform on your vehicle.
The better the tire traction, the higher the efficiency and safety, avoiding tire explosion.
The tires are the only contact aspect between the vehicle and the ground - so take care of them very carefully.
